Sub-Total: $0.00
Hydraulic Hose & Assemblies
Description
UIP offers hydraulic hoses in bulk or by the finished assembly with pre-attached hydraulic crimp fittings. We can customize the hose type, length, and fitting types to fabricate the perfect hose assembly for your application. Pressure testing of hydraulic hoses is also available. Contact Us Today!
Hydraulic Hose
UIP Type 2SN SAE 100R2AT Two-Wire Braid
High-pressure, certified hydraulic hose for use with petroleum, synthetic or water-based fluids in hydraulic systems. Suitable for agricultural, earthmoving and material handling equipment and machinery systems. Meets or exceeds requirements of SAE 100R2 Type AT EN 8853 2SN.
Application: Petroleum Based Hydraulic Fluids and Lubricating Oils
Sizes: 1/4” – 2” I.D.
Temperature: -40° to 212°F
Description: Black with White Stripe
Tube and Cover: Black Synthetic Rubber
Reinforcement: Two Steel Wire Braids
Packaging: 50 Foot Coils, Custom Cut Lengths, Custom Hose Assemblies
|
Part Number |
I.D. |
O.D. |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
Weight (lbs/ft) |
|||
|
PSI |
BAR |
PSI |
BAR |
INCH |
MM |
||||
|
4-2SN |
1/4″ |
0.58″ |
5800 |
400 |
23200 |
1600 |
3.9 |
100 |
0.242 |
|
6-2SN |
3/8″ |
0.74″ |
4800 |
330 |
19200 |
1320 |
4.9 |
125 |
0.363 |
|
8-2SN |
1/2″ |
0.86″ |
4000 |
275 |
16000 |
1100 |
7.1 |
180 |
0.457 |
|
10-2SN |
5/8″ |
0.98″ |
3625 |
250 |
14500 |
1000 |
7.9 |
200 |
0.538 |
|
12-2SN |
3/4″ |
1.14″ |
3120 |
215 |
12480 |
860 |
9.4 |
240 |
0.632 |
|
16-2SN |
1″ |
1.48″ |
2400 |
165 |
9600 |
660 |
11.8 |
300 |
0.907 |
|
20-2SN |
1- 1/4″ |
1.87″ |
1810 |
125 |
7240 |
500 |
16.5 |
420 |
1.445 |
|
24-2SN |
1- 1/2″ |
2.11″ |
1300 |
90 |
5220 |
360 |
19.7 |
500 |
1.781 |
|
32-2SN |
2″ |
2.63″ |
1160 |
80 |
4640 |
320 |
24.8 |
630 |
2.298 |
UIP Type 2SC SAE 100R16 Two-Wire Braid
Recommended for high-pressure hydraulic applications where extra flexibility is required. Meets or exceeds requirements of SAE 100R16 EN 857 2SC
Application: Petroleum Based Hydraulic Fluids and Lubricating Oils
Sizes: 1/4” – 1” I.D.
Temperature: -40° to 212°F
Description: Black with White Stripe
Tube and Cover: Black Synthetic Rubber
Reinforcement: Two Steel Wire Braids
Packaging: 50 Foot Coils, Custom Cut Lengths, Custom Hose Assemblies
Hydraulic Hose Fittings
Hydraulic hose fittings are used to connect hydraulic hoses, tubes, and pipes to pumps, valves, cylinders and other parts of the hydraulic system in a variety of hydraulic applications, including agriculture, mining, energy, road construction, and material handling.
Crimped hydraulic fittings are the most popular and widely used fittings in the fluid power industry because they are easier and quicker to attach than reusable fittings. Crimped fittings are also more reliable, however they require the use of a crimp device to permanently attach the fitting to the hose.
JIC fittings (Joint Industry Council) defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel.
To help determine the best type of fitting for the application, remember to utilize the S.T.A.M.P.E.D. acronym for proper hose selection.
K2FBPP
BSPP Female Swivel (60 Degree Seat)
K2FBPPX45
BSPP Female Swivel (45 Degree Cone Seat)
K2FBPPX90
BSPP Female Swivel (60 Degree Cone Seat)
K2FBPPX90L
BSPP Female Swivel (60 Degree Cone Seat) Long
K2FFORX
Female ORS Swivel
K2FJX
Female JIC 37 Degree Flare
K2FFORX
Female ORS Swivel
K2MPX
Male NPTF Swivel
K2MP
Male NPTF
K2MJ
Male JIC 37 Degree Flare
K2MFOR
Male ORS
NPT; BSPP; JIC; ORFS and Female Elbows (45° and 90°) available for custom two-wire hose assemblies. Not all available options shown.
